扭剪扳手有多種樣式，多種型號，樣式主要有手握型和角向型
There are many styles and models of torsion wrench, mainly including hand type and angle type
一般都是握柄式的，適用于M16.20.22.24.27.30六種扭剪螺栓
Generally, it is of grip type, applicable to M16.20.22.24.27.30 six kinds of torsional shear bolts
角向型扭剪扳手適用于空間距離受限，握柄式不能使用，小空間使用更實用一樣，適用于M16.20.22.24.27.30六種扭剪螺栓
Angular type torsion shear wrench is applicable to six types of torsion shear bolts M16.20.22.24.27.30, which is more practical than the grip type, because the space distance is limited
扭剪扳手的應用：
Application of torsion wrench:
扭剪型高強螺栓的初緊可使用沖擊電動扳手或定扭矩扳手,而終緊必須使用扭剪扳手，所以扭剪扳手是專門終緊扭剪型高強螺栓的。扭剪扳手的使用：
The impact electric wrench or fixed torque wrench can be used for the initial tightening of torsional shear high-strength bolts, and the torsional shear wrench must be used for the final tightening, so the torsional shear wrench is specially used for the final tightening of torsional shear high-strength bolts. Use of torsion wrench:
扭剪扳手主要是終緊扭剪型高強螺栓的，它的目的就是把扭剪型高強螺栓的梅花頭打斷即可。工作時將扳手頭對準螺栓頭，扣動開關即可開始工作，幾秒后，螺栓梅花頭將被扭斷，然后抽出扳手扣動扳機將梅花頭彈出，即結束工作。
Torsional wrench is mainly used for final tightening of torsional shear type high-strength bolts. Its purpose is to break the Torx head of torsional shear type high-strength bolts. When working, align the wrench head with the bolt head, and press the switch to start working. After a few seconds, the bolt ring head will be twisted, and then pull out the wrench and pull the trigger to pop the ring head out, which is the end of work.
扭剪扳手的特點：
Features of torsion wrench:
操作方便、省時省力、方便
Convenient operation, time-saving and labor-saving, safe and convenient
Thank you for your reading. The source of this article is: Torsion wrench price. For more information and questions, please click: http://wrjzzs.com We will continue to work hard to provide you with services. Thank you for your support!
