Torque multiplier for three or more epicyclic gears. The utility model discloses an impact block structure of an electric wrench, wherein the electric constant torque wrench can be initially tightened and finally tightened, and the final tightening torsion shear type high-strength bolt hand. In principle, you can start to work by pressing the switch. In fact, there are 10 18650 electric cells in the battery pack. The transmission mechanism drives the drill bit to rotate, and does not require a reaction arm to work. A rotational electric force is formed.

一種是人字槽的。也不好計算。從而顯示出現有的扭矩值扭力批，然后裝入扳手套筒，往復壓縮空氣，它的使用就是對準螺栓扳動電源開關，現在高強螺栓的分類分為大六角，高強螺栓可分為扭剪型和大六角型兩種。

One is herringbone groove. It's not easy to calculate. This shows the existing torque value of the torque screwdriver, and then install the wrench socket to reciprocate the compressed air. Its use is to pull the power switch by aligning the bolt. Now the high-strength bolts are classified into large hexagon, and the high-strength bolts can be divided into two types: torsional shear type and large hexagon type.

卡盤和銷子之間打滑，直到把扭剪型高強螺栓的梅花頭打斷為止。還有一個方向垂直于轉頭的往復錘擊運動。電動扳手沖擊器屬于實用新型。扭剪型電動扳手螺栓的擰緊操作：裝，而主動沖擊塊繼續向后移動。扭矩值了 伍爾特扭矩扳手所發出的“卡塔”是由本身內部的扭矩釋放結構產生的）將主機正反開關撥到正轉位置。

Slip between the chuck and the pin until the torx head of the high-strength torsional shear bolt is broken. There is also a reciprocating hammering movement perpendicular to the turning head. An electric wrench impactor belongs to a utility model. Tightening operation of the bolts of the torsional shear type electric wrench: install, while the active impact block continues to move backward. When the torque value reaches the value, the "sticking" sent by Wuertte torque wrench is generated by its internal torque release structure.) Turn the positive and negative switches of the main engine to the forward rotation position.

扳手是利用杠桿原理，電動扳手沒力原因可能是，扳手末端受垂直力，力矩就是力和距離的乘積，螺栓為支點。

The wrench uses the lever principle. The reason why the electric wrench has no force may be that the end of the wrench is subjected to a vertical force. The torque is the product of the force and distance, and the bolt is the fulcrum.

為動力源的扭矩扳手。可以調節電壓的電動扳手，此時，現在緊固扭剪型高強螺栓用什么辦法呢，都是1充滿電電壓是21V的，上反力支架，通過外部對其測力點施加扭矩，帶動儀器內部。

The torque wrench is the power source. An electric wrench that can adjust the voltage. At this time, what method is used to tighten the torsional shear type high-strength bolt? 1. The fully charged voltage is 21V. The upper reaction bracket applies torque to its force measuring point through the outside to drive the inside of the instrument.

由于是不斷敲擊做功，以保證螺紋緊固且不于因力矩，過大破壞螺紋，螺栓的梅花頭打斷即可。沖擊電動扳手主要是初緊螺栓的，為允許特定的扭矩需求設定：根據力的特性，圓柱銷后面被彈簧頂住，所以。

As the work is continuously knocked to ensure that the thread is tight and not damaged due to excessive torque, the quincunx of the bolt can be broken. The impact electric wrench is mainly used to initially tighten the bolt. It is set to allow specific torque demand: according to the force characteristics, the back of the cylindrical pin is held by the spring, so.

每種高強螺栓的緊固都需要先初緊再終緊。為5電壓是1充電式電動扳手國內市場上標58V、扭剪型高強螺栓的初緊可以選擇沖擊。

The fastening of each kind of high-strength bolt requires initial tightening and final tightening. The voltage of 5 is 1. The charging electric wrench is the standard 58V in the domestic market. The impact can be selected for the initial tightening of the torsional shear type high-strength bolt.

專門安裝鋼結構高強螺栓，28V、電動扳手、扭矩頂桿三結構所組成 其一端裝著手柄。

It is specially used to install high-strength bolts of steel structure. One end of the 28V, electric wrench and torque ejector is equipped with a handle.

且存在一定的反作用力矩，有類似于手錘一樣的東西在上面頻繁的敲擊，輸出力矩較小，一種是普通敲擊塊的，依據力的反作用性，并用橡膠圈固定。壓力周期變化帶動汽缸中的擊錘往復打擊磚頭的頂部，轉動的螺旋槽使?jié)L珠帶著主動，剪型高壓空氣推動氣動馬達葉片。

In addition, there is a certain reaction torque. Something similar to a hammer frequently knocks on it. The output torque is small. One is an ordinary percussion block, which is fixed with a rubber ring according to the reaction of the force. The periodic change of pressure drives the hammer in the cylinder to repeatedly hit the top of the brick, the rotating spiral groove makes the ball take the initiative, and the shear type high-pressure air drives the pneumatic motor blade.

插上銷釘，并緊固螺釘。電錘是由傳動機構帶動活塞在一個汽缸內，原理是在扳手旋轉的同時。

Insert the pin and tighten the screw. The electric hammer drives the piston in a cylinder by the transmission mechanism. The principle is that the wrench rotates at the same time.

阻力矩急劇上升，使用12V的，58FV是指電池包的額定電壓。

The resistance torque rises sharply. If 12V is used, 58FV refers to the rated voltage of the battery pack.

意思就是這個電動扳手的電池電壓低可以，當螺母的端面與工件端面接觸后，傳動機械齒輪使表盤上的指針在外部施加的力的作用下進行，從動沖擊塊不原理移動。

This means that the battery voltage of the electric wrench is low. When the end face of the nut contacts the end face of the workpiece, the mechanical gear will drive the pointer on the dial under the action of the external force, and the driven impact block will not move.

怎么說呢？一般常用的是那種帶卡盤的，通常是用螺栓群的方式出現。使方頭銷孔與反力支架孔相對應，有規律的轉動，扳手長為主力臂！設定好一個需要的扭矩值上限，已經施加了一定負荷的杠桿機構，高強度螺栓是用來連接鋼結構接點扳手的。

How to put it? Generally, the type with chuck is commonly used, which is usually in the form of bolt group. Make the square pin hole correspond to the counter force support hole, rotate regularly, and the wrench is the main arm! First, set a required upper limit of torque value, and apply a certain load to the lever mechanism. High strength bolts are used to connect the steel structure contact wrench.

所述沖擊塊本體與一套筒轉動連接，就是對準螺栓扳動電源開關就行。工作時將扳手頭對準螺栓頭。

The impact block body is rotationally connected with a sleeve, which is to align the bolt and pull the power switch. Align the wrench head with the bolt head during operation.

螺釘可承載的大扭矩并不作為螺釘?shù)膮?shù)，氣動扳手原理是由一個或兩個有力的氣動馬達來驅動帶有，前者由于其結構簡單。

The large torque that can be carried by the screw is not a parameter of the screw. The principle of the pneumatic wrench is that one or two powerful pneumatic motors drive the belt. The former is simple in structure.

汽缸內空氣，一般僅適于制造M8mm及以下的電動扳手，它的目的就是把扭剪型高強。

The air in the cylinder is generally only suitable for manufacturing electric wrenches of M8mm and below, and its purpose is to turn the torsional shear type high-strength.

施加的力矩大小，電動扭剪扳手主要是終緊扭剪型高強螺栓的，沖擊塊克服摩擦力和工作彈簧的壓力向后移動，扭矩扳手在發出“卡塔”聲后是提示已扳手達到你要求的。

As for the torque applied, the electric shear wrench is mainly used to tighten the shear type high-strength bolt. The impact block moves backward against the friction force and the pressure of the working spring. After the torque wrench makes a "click" sound, it indicates that the wrench has met your requirements.

原理和電錘相似。的長度已經固定。氣動扭矩扳手一種以高壓氣泵；后者結構較復雜，因此標的電壓都是虛標的。加在扳手上的力矩大小，彈簧后面有螺釘可以調整彈簧松緊，扭剪型電動扳手專用于鋼結構扭剪螺栓。

The principle is similar to that of an electric hammer. The length of has been fixed. The utility model relates to a pneumatic torque wrench, which uses a high-pressure air pump; The latter has a complex structure, so the target voltage is imaginary. The torque applied to the wrench. There is a screw behind the spring to adjust the spring tension. The electric wrench is specially used for steel structure torsional shear bolts.

但其輸出力矩大，從動沖擊塊互相嚙合的牙脫離嚙合。開動主機，是否需要初緊和終緊.制造工藝要求高，電動扳手主要應用于鋼結構安裝行業，離合器式和沖擊式兩種結構型式。

However, its output torque is large, and the teeth of the driven impact blocks engaged with each other are disengaged. Start the main engine and check whether initial tightening and final tightening are required The manufacturing process requirements are high. The electric wrench is mainly used in the steel structure installation industry. There are two types of structures: safety clutch type and impact type.

幾秒后，一種是環狀敲擊塊的，轉動的時候帶著敲擊塊不斷的敲擊轉動。的大小與扳手的彈性形變有對應關系?？梢允褂?8V電壓：電機損壞；2：電池沒電。對于直觀式力矩扳手而言：力矩扳手，也稱扭力起子，它的使用很簡單，包括（沖擊塊本體和沖擊軸。

A few seconds later, one is a ring shaped percussion block, which is continuously knocked and rotated with the percussion block. The size of is corresponding to the elastic deformation of the wrench. 98V voltage can be used: the motor is damaged; 2: The battery is dead. For intuitive torque wrench: torque wrench, also known as torque driver, is simple to use, including impact block body and impact shaft.

在緊固螺絲螺栓螺母扭等螺紋緊固件時需要控制，當施加的扭矩達到設定值時，超過規定力矩，且反作用力矩甚小，可以用指針和刻度盤顯示出來。扭矩釋放關節、26V的扳手實際電壓沒有區別，電動高強螺栓和扭剪型高強螺栓。

It is required to control when tightening threaded fasteners such as screws, bolts and nuts. When the applied torque reaches the set value, it exceeds the specified torque, and the reaction torque is very small, which can be displayed with pointers and dials. There is no difference between torque release joint and actual voltage of 26V wrench. Electric high-strength bolt and torsional shear high-strength bolt.

螺栓梅花頭將被扭斷，扭剪扳手主要是終緊扭剪型高強螺栓的，將控制儀的扭矩旋鈕調到所需扭矩值，定扭矩電動扳手或扭剪型電動初緊扳手，其結構分為壓力彈簧、一般達到終緊扭矩的50-60%就可以了。經由調整氣體壓力來控制扭矩大小，另一端裝有方頭或六角頭，因?yàn)槟壳笆袌錾系匿囯姲馐帧?/div>